Views: 50 Author: Allen Publish Time: 2025-04-28 Origin: Site
The db killer can be installed in the exhaust pipe or in the connecting pipe.
Since the muffler is used to reduce noise, the exhaust volume needs to be reduced, which will inevitably cause the temperature inside the exhaust pipe to rise and reduce the service life of the exhaust pipe.
Our suggestion is that if you don't need to use the db killer, try not to install it.
If you must install it, our suggestion is:
1, When it can be installed in the middle section or the front section, it is preferred to be installed in the front section or the middle section, because the connecting pipe is pure 304 stainless steel and is very heat-resistant.
2. If it cannot be installed in the middle section or the front section (for example, the middle section is too short or the bending angle is too large), it needs to be installed at the exhaust pipe interface.
3, when the db killer installed, install the link pipe together and use springs to fix it.
In addition, we recommend that you try to remove the db killer when using it for long distances or driving on the highway.
content is empty!